HomeProductsValvesInnovations for AutomationInformation Request E-Mail
Valve VALVOLE MWP
Highly integrated system available for MACH valves batteries. Direct connection to multi-connector. The sensors are connected via an M12 PLUG. Available for PROFIBUS-DP and INTERBUS-S versions.

ADVANTAGES AND APPLICATIONS
The main advantages of a serial system over a conventional system are:

  • simplification of planning and integration
  • simplification and reduction of installation materials
  • reduction in wiring times and cost saving
  • expandability
  • a reduction in the risk of failure and connection errors
  • slave autotest
 IP 65 Profibus / Interbus Mach 16 Dedicated
TECHNICAL DATA PROFIBUS-DP INTERBUS-S
Versions 16 outputs 16 outputs
16 inputs + 16 outputs 16 inputs + 16 outputs
Supply voltage 24 Vdc (19V......30V), approx. 100 mA
Degree of protection IP65
Temperature –20°÷55°C (–4°÷131°F)
Field Bus data Transmission protocol Profibus-DP DIN E 19245 Interbus-S DIN E 19258
Transmission method Synchronous or Freeze-Mode
Transfer speed 1.5MBit/s
Addresses Rotary switches BCD, 3...99
Input technical data Type pnp proximity sensors or IEE 1131-2 compatible mechanical limit switch
Voltage 24VDC (from 18V to 30V) , max. 400mA simultaneously
Indicator light Each input has a LED
Output technical data Voltage 24VDC (from 18V to 30V) max. voltage 2A for each actuator
Max. exchange current 1.6A, system protected by short-circuit fuse
Max. signal exchange frequency 100 Hz Ohm, 1 Hz induction
Indicator light Each output has a LED
Autotest Field bus RUN-LED BA-,RD-,RC-LEDs
Bus error LED + alarm signal to master  
Start-up signal LED + alarm signal to master
COMPONENTS
  1. Auto-test LED
  2. Connector for 15 mm power supply, C-SHAPE DIN 43650
  3. Input connectors
  4. BUS input connectors
  5. BUS output connectors
Componets