| TECHNICAL
DATA |
| Valve port thread |
1/8’’ |
| Type of pilot |
Pneumatic actuation M5 -
Solenoid actuation with integrated coil |
| Max. outer diameter of fittings
for ports 1, 3, 5 |
15 mm |
| Max. outer diameter of ports 2-4 |
15 mm |
| Operating temperature |
–10°C÷+60°C |
| Minimum actuation pressure |
Monostable with pneumatic
spring |
| Pilot - pneumatic
controls |
1.6 bar for monostable valves
with mechanical spring
0.9 bar for bistable valves - 1.9 bar for 5/3 valves |
| Max. operating pressure |
10 bar |
| Fluid |
Filtered lubricated or
unlubricated compressed air; lubrication if used must be continuous |
| Recommended lubricant |
ISO and UNI FD 22 |
| Number of ways in base |
1-3-5 and Pilot Exhaust |
| Screws for wall-mounting single
valve |
2 M3 screws |
| Screws for base-mounting valve |
2 M2.5x30 screws |
| Installation |
In any position (vertical
mounting is not recom-mended for bistable valves subjected to vibration). |
Response times (TRA) at 6 bar
during actuation (m/sec.) |
12 ms (5/2 monost.) ÷18 ms
(5/2 bistable)
23 ms (5/3 valve) |
Response times (TRA) at 6 bar
repositioning (m/sec.) |
26 ms (5/2 monost.) ÷ 22 ms
(5/2 bistable)
21 ms (5/3 valve) |
| Conductance C NI/min bar |
149.8 (5/2 valves) ÷163.4 (5/3
valves) |
| Critical ratio b bar/bar |
0.525 (5/2 valves) ÷0.491 (5/3
valves) |
