HomeProductsInnovations for Automation E-Mail
Cylinder Multiple Connector
Mach 16 valves can be mounted on bases complete with pneumatic or electrical connection. The electric contacts of the individual valves are connected by means of a printed circuit in a sealed conduit to a single connection point suitable for up to 16 controls. The number 16 has been chosen because the number of outputs of most PLC output boards is 16 or a multiple of it.
The System has numerous alternatives and variants for a wide range of requirements:
  • Base for monostable or bistable valves.
  • Connection via a multiple connector or wired cable.
  • Supply of individual parts or ready prepared bases or complete valve units.
  • The configuration can be modified at any time to convert bases for monostable valves into bases for bistable valves.
  • The return cable can be used to connect two monostable valve units to a single multiple connector.
    All versions are certified for electromagnetic compatibility and hence can bear the CE mark.
    The system is prearranged for mounting a slave for field buses which can be added at any time.
   
TECHNICAL DATA    
Supply voltage

24VDC, 24VAC

Max absorption

50 mA per position
Valve actuation indicator

yellow LED

Operating temperature

-10º to +60ºC

Degree of protection with valves mounted

IP65
Insulation Class

to IEC 664-1 abd VDE 0110 group C

Electromagnetic Compatibility

to EC226/89

Max. number of solenoids to apply

16

Number of contacts

19 = 16 for solenoids, 2 common, 1 earth
Version with Connector  
Connector insulation class II to MIL 26485
Cross section of cables to weld connector max. 0.6 mm²
number of contacts 19 = 16 for solenoids, 2 common, 1 earth
Pre-wired version  
Cable length 5 m
Number of wires 19 = 16 for solenoids, 2 common, 1 earth
Wire cross section 0.22 mm²
Shielding 80-90% airtight covering
Cable Outer oil-proof and flameproof PVC sheath
Cable outside diamter 8.5 mm
   
WIRING DIAGRAM FOR VERSION WITH CONNECTOR

Position of electric contact

 Pin on flying connector Position of electronic contact Pin on flying connector Position of electric contact pin on flying connector
V1 S V8 J V15 B
V2 F V9 A V16 P
V3 U V19 N Earth K
V4 H V11 M -COM E
V5 V V12 L -COM E
V6 G V13 D    
V7 T V14 C    
WIRING DIAGRAM FOR PRE-WIRED VERSION

 

Position of electric contact Color of corresponding wire Position of electric contact Color of corresponding wire Position of electric contact Color of corresponding wire
V1 green/black V8 brown/red V15 orange
V2 yellow V9 red/white V16 blue/black
V3 black/white V19 red/black EARTH yellow/red
V4 blue V11 green/red -COM brown/black
V5 red V12 blue/red -COM green
V6 yellow/black V13 brown    
V7 white V14 orange/black