HomeProductsInnovations for Automation E-Mail
Fittings Miniature Reducer
     The miniature pressure regulator comes in four different configurations:
  • Line mounted with push-in fittings at the inlet and outlet*
  • Line mounted with threaded port at the inlet and push-in fitting at the outlet*
  • Line mounted with push-in fitting at the inlet and threaded port at the outlet*
  • Cartridge type for direct mounting in a specially shaped seat*

     The miniature pressure regulator is equipped with pressure relief.

 Series RML, RMC, RMS
  
TECHNICAL DATA Ø 6 Ø 8
Max operating pressure MPa 1
bar 10
psi 145
Temperature range °C
°F		 from –20°C to +80°C
-4°F÷+176°F
Max flow rate on regulation* Nl/min 450 850
Flow rate on relief* Nl/min 550 950
Adjustment Manual or using a screwdriver
Internal system Tapered needle
Recommended pipe Rilsan PA 11 - Nylon 6 - Polyamide 12 - Polypropylene
Fluid lubricated or unlubricated filtered air
    *(at 6.3 bar)
   
COMPONENTS
  1. Technopolymer body
  2. Nickel-plated brass insert
  3. Nickel-plated brass adjusting screw
  4. Steel adjusting spring
  5. Brass piston rod
  6. NBR shutter
    7.
  7. Stainless steel shutter spring
  8. Adjusting screw ring nut
  9. Nickel-plated brass wall ring nut
  10. Technopolymer release bushing
  11. Technopolymer stop bushing
  12. Stainless steel crimping spring
  13. Technopolymer spring ring
  14. NBR gasket
  15. Nickel-plated brass rotating ring