HomeProductsInnovations for Automation E-Mail
Cylinder Guided Compact Cylinders
     The series CMPG guided compact cylinder is a practical, economical cylinder with a guide unit.
     The anodized aluminum alloy jacket has slots for the two supplementary guide rods to run on bushes or bearings.  It also contains slots for a retracting sensor.		 Guided Compact Cylinder
   
TECHNICAL DATA    
Operating pressure bar 1÷10
  MPa 0.1÷1
psi 14.5÷145
Temperature range °C 0÷80°C
  °F 32÷176°F
With dry air °C -20°
  °F -4°
Maximum stroke

100 mm

Version

With bronze bushings

 

With ball bearings
   
COMPONENTS
  1. JACKET: anodized aluminum alloy
  2. PISTON ROD: ground chrome steel
  3. GUIDE ROD: ground chrome steel
  4. GUIDE ROD: hardened and tempered chrome steel and chromed steel
  5. REAR BASE: anodized alumimum alloy
  6. FRONT BASE: anodized aluminum alloy
  7. GUIDE BUSHING: self-lubricating bronze
  8. BUFFER GASKET: NBR
  9. PISTON: aluminum alloy
  10. MAGNET: plastoferite
  11. PISTON GASKET: (PARKER PRADIFA) NBA
  12. GUIDE RING: PTFE
  13. SLIDE BUSHING: sintered bronze
  14. BALL BEARINGS
  15. DUST SCRAPER RING: NBR or Viton®
  16. GREASE NIPPLES: zinc-plated or stainless steel
    17.
Components
    
KEY TO CODES
W 1 4 3 0 3 0 2 0 0 2 5
TYPE DIAMETER VERSION STOKE
  16 2 bronze bushings 0÷100 mm
20 3 ball bearings  
25  
32
40
50
63
80
A1=100