HomeProductsInnovations for Automation E-Mail
Cylinder Compact Cylinders
     Compact cylinder series CMPC available in numerous versions to meet a full range of requirements:
  • With or without magnet
  • Single-acting extended rod, retracted or through-rod
  • Dual-acting non-rotating and dual-acting through-rod versions
  • Tandem with two, three or four stages
  • Multi-position with two and three stages
  • Fixing center distances to ISO 6431 - VDMA 24562 form Ø 32 to Ø 100 and from Ø 20 to 100 complying with French standard NFE 49-004-1 and 2. Ø 12 and Ø 16 have center distances compatible with trade cylinders

     The special profile and outer heads locked onto the jacket by means of Tap Tite screws ensure optimal guiding of the cylinder and multiple mounting options with a wide range of mountings.
     To determine the positioning of the piston, it is possible to mount retracting magnetic limit switches.

 Compact Cylinder
   
TECHNICAL DATA    
Operating pressure bar max 10 bar (max 1 MPa-145psi)
Temperature range -10°C÷+80°C
Fluid Unlubricated air. Lubrication, if used, must be continuous
Bores mm Ø 12, Ø 16; interchangeable with similar products
   mm

Ø 30, Ø 40, Ø 50, Ø 63, Ø 80, and Ø 100 with ISO 6431 VDMA24562 mounting center distances
mm

Ø 20, Ø 25, Ø 32, Ø 40, Ø 50, Ø 63, Ø 80, and Ø 100 with NFE 49-004-1 and 2 mounting center distances
Design

With profile, heads with Tap Tite screws

Versions

Double-acting, Single-acting extended or retracted rod, Through-rod, Single-acting through-rod,

Single-acting non-rotating, Through-rod non-rotating.

All versions are available with male or female piston rod.

Magnet for sensors

All versions come complete with magnet.  Supplied without magnet on request.

Inrush pressure

As required

Notes

For correct operation, it is advisable to use 50m filtered air.
   
COMPONENTS Ø 12÷25
  1. PISTON ROD: C45 steel or stainless steel, thick chromed
  2. HEAD: extruded anodized aluminum alloy
  3. JACKET:drawn anodized and calibrated aluminum alloy
  4. PISTON GASKET: polyurethane
  5. MAGNET: neodymium
  6. PISTON ROD GASKET: polyurethane
  7. GUIDE BUSHING: steel strip with bronze and PTFE insert
  8. STATIC O-RINGS: NBR
  9. SECURING SCREWS: zinc-plated steel
    10.
Cpomponents
   
COMPONENTS Ø 32÷100
  1. PISTON ROD: C45 steel or stainless steel, thick chromed
  2. HEAD: extruded anodized aluminum alloy
  3. JACKET:drawn anodized and calibrated aluminum alloy
  4. PISTON GASKET: polyurethane
  5. MAGNET: neodymium
  6. PISTON ROD GASKET: polyurethane
  7. GUIDE BUSHING: steel strip with bronze and PTFE insert
  8. STATIC O-RINGS: NBR
  9. SECURING SCREWS: zinc-plated steel
    10.
Cpomponents
    
TECHNICAL DATA
Technicial Data
  1. Compact cylinder available with two separate fixing centre distances:
    • Ø 32÷100 to ISO 6431 VDMA24562
    • Ø 20÷100 to NFE 49-004-1 and 2
  2. Pre-wired retracting sensor with or without connector
  3. Plastic strip to keep out dirt and/or protect the sensor wire cod. W0950000160
  4. Ball-and-socket joint code W095… 2030
  5. Example of cylinder mounting with feet code W095… 6001
    All mountings come complete with cylinder assembly screws
  6. Sensor slot
  7. Piston rod with male or female thread as required
    
KEY TO CODES - ISO 6431 STD CYLINDER
CYL 2 3 1 0 2   5 0 0 5 0 C P
  TYPE         BORE     STROKE CONFIGURATION
  23 Compact
cylinder		 0
1		 Double-acting
Double-acting		 O Magnetic 12 0 Standard   C C45 piston
rod		 P Polyurethane
gaskets
    centre distances   through-rod S Non-
magnetic		 16
20		 A 2-stage
tandem		     Chromium-plated    
    to UNITOP 2* Double-acting     25
32		 B 3-stage
tandem		   X Stainless
steel piston rod		    
    male piston rod   through-rod     40
50		 C 4-stage
tandem		          
  24 Compact
cylinder		 3 perforated
Single-acting		     63              
    centre distances   retracting piston rod     80 P Stage 1          
    to UNITOP 4 Single-acting     A1= R Stage 2          
    male piston rod   extended piston rod     100 T Stage 3          
  25 Compact
cylinder		 5 Single-acting
through-rod		                    
    centre distances 6* Single-acting through                    
    to ISO male
piston rod		 7 piston rod perforated
Double-acting		                    
  26 Compact
cylinder		 8* Single-acting                    
    centre distances   retracting piston                    
    to ISO female
iston rod		 9* rod non-rotating
Single-acting		                    
        extended piston                    
        rod non-rotating                    
      A Double-acting                    
*Not available when going to press
Examples of codes – the ordering codes for a Multi-position cylinder is a combination of several codes, each describing a stage.
Multi-position cylinder:
Stage 1º: CIL 240 0 25 P . . . CP
Stage 2º: CIL 240 0 25 R . . . CP
Stage 3°: CIL 240 0 25 T . . . CP