Metal Work logic elements are available with 5 different functions: OR, AND, NOT, YES, MEMORY. Main features common to all elements: Adaptor for bar (DIN EN 50022) integral with the body. Built-in pressure indicator. Pipe locking system using Ø4 built-in fittings.

TECHNICAL DATA		AND - OR - YES - NOT - MEMORY
Operating temperature		–10÷+60°C
Valve fitting		Push-in fitting for Ø4 pipe
Pressure range		OR - AND: da 1.5 a 8 bar YES-NOT : from 0 to 8 bar, pilot pressure from 1.5 to 8 bar MEMORY : from 0 to 8 bar, pilot pressure from 1.5 to 8 bar NOT: from 0.4 to 6 bar
Nominal diameter	mm	2.7
Flow rate at 6 bar (0.6 MPa÷87 psi)		100 Nl/min
P 1 bar (0.1 Mpa÷14.5 psi)
Fluid		Lubricated or unlubricated filtered compressed air; must be uninterrupted when lubricated
Recommended lubricant		ISO e UNI FD22
Actionament		Via compressed air
Reset		AND-OR: via compressed air/YES-NOT via mechanical sprin MEMORY: via compressed air.
Installation		In any position
Mounted		On Omega bar (DIN EN 50022) size 35x7 or 35x15 Wall-mounted with Ø4.2 holes
Body		Technopolymer
Spool		Aluminium
Seal		NBR (Viton® on request)

LOGIC ELEMENT: OR	LOGIC ELEMENT: AND

Viton (R) is a registered trademark of DuPont Dow Elastometers.