|
||||
 |
 |
 |
||
|
||||
|
|
|
||
| The flow micro-regulator regulates the speed of the piston
rod in the pneumatic cylinders. The configuration of micro-regulators type C (to mount on the cylinder inlet) and type V (to mount on the valve ports) gives full flow during supply and regulated flow during exhaust. With type B (bidirectional) both the supply and exhaust flow rates can be adjusted. The adjusting knobs on Metal Work MFRs allows triple adjustment: manual operation on the milled section, screwdriver inserted in the relevant slot, and using a hex. spanner. The MRF ring can be orientated even when mounted. |
 |
| TECHNICAL DATA | M5 | 1/8’’ | 1/4" | 3/8" | 1/2" | ||||||||||
| Tubo | Ø4 | Ø5 | Ø6 | Ø4 | Ø5 | Ø6 | Ø8 | Ø6 | Ø8 | Ø10 | Ø12 | Ø10 | Ø12 | Ø12 | |
| Threaded ring | M5 | 1/8’’ | 1/4’’ | 3/8’’ | 1/2’’ | ||||||||||
| Max. inlet pressure | MPa bar psi |
1 10 145 |
1 10 145 |
1 10 145 |
1 10 145 |
1 10 145 |
|||||||||
| Max. flow rate during regulation* | Nl/min | 95 | 340 | 600 | 870 | 1400 | |||||||||
| Fluid | Compressed air, filtered, lubricated or unlubricated | ||||||||||||||
| Temperature range: technopolymer ring | °C °F |
–10°÷+50° 50°÷122° |
–10°÷+50° 50°÷122° |
–10°÷+50° 50°÷122° |
–10°÷+50° 50°÷122° |
–10°÷+50° 50°÷122° |
|||||||||
| Anello in ottone | °C °F |
–10°÷+70° 50°÷158° |
–10°÷+70° 50°÷158° |
–10°÷+70° 50°÷158° |
–10°÷+70° 50°÷158° |
–10°÷+70° 50°÷158° |
|||||||||
| * (a 6 bar) | |||||||||||||||
| COMPONENTS | |
|
 |
|
