HomeProductsSkillairBitNew Deal E-Mail
Lock-Out Valve Skillair

     The job of this valve is to make the circuit independent from the air supply. It is basically a three-way valve. In the closed position, it cuts off the air supply and discharges the downstream circuit at the same time, which is means it is particularly useful during servicing operations. The hand-operated version can be padlocked to lock the knob in a closed position so that it can only be opened by someone with the right key. An interlocked version is available for low pressure operation.
TECHNICAL DATA V3V
100
V3V
100
V3V
200
V3V
200
V3V
200
V3V
300
V3V
300
V3V
300
Threaded port   G 1/4 G 3/8 G 1/4 G 3/8 G 1/2 G 1/2 G 3/4 G 1’’
Min. inlet pressure for solenoid version ** MPa
bar
psi
0.3
3
43.5
0.3
3
43.5
0.4
4
5.8
Max. inlet pressure* MPa
bar
psi
1.5
15
217
1.3
13
188
1.3
13
188
Flow rate at 6 bar (0.6 MPaś87 psi)
P 0.5 bar (0.05 MPaś7 psi)
Nl/min

scfm

1300

46

2400

85

3200

113

Flow rate at 6 bar (0.6 MPaś87 psi)
P 1 bar (0.1 MPaś14 psi)
Nl/min

scfm

1650

58

3000

106

4700

166

Fluid Filtered, lubricated or unlubricated compressed air. Lubrication, if used, must be continuous
Max temperature °C
°F
50
122
50
122
50
122
Weight Kg ~ 0.5 ~ 0.8 ~ 1.2
Wall fixing screws   M4 x 50 M5 x 60 M5 x 70
Mounting In any position
Type of control Manual – Pneumatic – Solenoid – Solenoid pilot-assisted
* 1 MPa – 10 bar – 145 psi for solenoid version
** 0.01 MPa – 0.1 bar – 1.45 psi for manual, pneumatic and pilot-assisted versions with controls min. 0.3 MPa 3 bar 43.5 psi.
COMPONENTS
  1. Technopolymer body
  2. Operating button
  3. Technopolymer knob
  4. Stainless steel safety lamination
  5. Locking unit
  6. OT58 brass piston rod
  7. OT58 brass top plug
  8. Zamak end plate
  9. Valve with vulcanized NBR gasket
  10. OT58 brass bottom plug
  11. Stainless steel valve spring
  12. NBR gaskets