HomeProductsCylindersInnovations for AutomationRegional Sales ManagersInformation Request E-Mail
Cylinders Short Stroke Cylinder MWP

    Compact cylinders suitable for installation in limited spaces:

  • configuration with or without magnet
  • single or double-acting - single or through-rod
  • anti-rotation version and with built-in fixings
  • possible choice of NBR, POLYURETHANE or Viton® gaskets
  • special design on request.
 Short Stroke Cylinder

TECHNICAL DATA Polyurethane NBR Viton®
Operating pressure max 10 bar (max 1 MPa - 145 psi)
Temperature range –10°C÷+80°C –10°C÷+80°C –10°C÷+150°C
(non-magnetic cylinders)
Fluid Unlubricated air. Lubrication, if used, must be continuous
Bores Ø 12 ; Ø 16 ; Ø 20 ; Ø 25 ; Ø 32 ; Ø 40 ; Ø 50 ; Ø 63 ; Ø 80 ; Ø 100
Design With profile
Standard strokes Double-acting:
Ø 12 to Ø 25, stroke 5 to 50 mm
Ø 32 to Ø 40, stroke 5 to 70 mm
Ø 50 to Ø 63, stroke 5 to 110 mm
Ø 80 to Ø 100, stroke 5 to 150 mm
  Single-acting:
Ø 12 to Ø 25, stroke 5 to 25 mm
Ø 32 to Ø 63, stroke 5 to 50 mm
  Anti-rotation:
Ø 12 to Ø 63, stroke 5 to 120 mm
Ø 80 to Ø 100, stroke 5 to 150 mm
Versions Double-acting, Double-acting through-rod, Single-acting retracted piston rod, Single acting extended piston rod, Single-acting through-rod, Perforated through-rod, Anti-rotation, Oscillating male, Oscillating female.
Magnet for sensors  All versions come complete with magnet. Supplied without magnet on request
Inrush pressure Ø 12 to Ø 32: 0.6 bar - Ø 40 to Ø 100: 0.4 bar
Forces generated at 6 bar thrust/retraction Ø 12: 64N / 50N
Ø 25: 265N / 228N
Ø 50: 1060N / 935N
Ø 100: 4241N / 3985N		 Ø 16: 108N / 84N
Ø 32: 434N / 373N
Ø 63: 1683N / 1545N		 Ø 20: 169N / 130N
Ø 40: 678N / 605N
Ø 80: 2714N / 2500N

COMPONENTS
  1. PISTON ROD: C40 steel or stainless steel, thick chromed
  2. HEAD:
  3. 12 to 25 painted OT58 brass
  4. 32 to 100 painted aluminium
  5. PISTON ROD GASKET:
  6. 12 to 63 SFR (PARKER PRADIFA) NBR or Viton®
  7. 80 to 100 polyurethane (PARKER PRADIFA), NBR or Viton®
  8. GUIDE BUSHING: steel strip with bronze and PTFE insert
  9. JACKET: drawn anodised aluminium alloy
  10. HALF-PISTON:
  11. 12 to 63 acetal resin
  12. 80 to 100 in aluminium with PTFE guide pad
  13. PISTON GASKET:
  14. 12 to 63 polyurethane (PARKER PRADIFA), NBR or Viton®
  15. 80 to 100 SFR (PARKER PRADIFA) NBR or Viton®
  16. MAGNET: B 12 to 25 in neodymium - B 63 to 100 in plastoferrite
  17. Static O-rings: NBR or Viton®
Component

KEY TO CODES
CYL 2 1 2   0 4 0 0 0 1 0 C P
  TYPE     DIAMETER STROKE CONFIGURATION
  210 Single-acting, 0 Magnetic 12   Ø 12÷25 stroke 5 ÷50 mm C C40 chromed rod
    retracted rod S Non-magnetic 16   Ø 32÷40 stroke 5 ÷70 mm   Ø12 to 63 mm
  211 Single acting,     20   Ø 50÷63 stroke 5÷110 mm A C40 chromed rod
    extended rod     25   Ø 80÷100 stroke 5÷150 mm   Ø 80 to 100 mm
  212 Double acting,     32           X Stainless steel rod,
    magnetic     40             Ø 12 to 63
  214 Double acting,     50           Z Stanless steel rod,
    through-rod     63             Ø 80 to 100
  215 Single-acting,     80           P Polyurethane gaskets
    retracted, anti-rotation     A1=100           N NBR gaskets
  217 Double acting,                 V Viton® gaskets
    anti-rotation                    
  218 Double acting,                    
    perforated through-rod                    
  221 Oscillating male hinge                    
    (up to Ø 63 only)                    
  222 Oscillating female hinge                    
    (up to Ø 63 only)                    
  223 Single-acting,                    
    through-rod