HomeProductsCylindersInnovations for AutomationRegional Sales ManagersInformation Request E-Mail
Cylinders Mini Cylinder ISO 6432 MWP
Mini-cylinders to ISO 6432 are available in various versions with a wide range of accessories:
  • configuration with or without magnet
  • single- or double-acting - single or through-rod
  • version with pneumatic cushioning (B 16-20-25)
  • choice of gaskets made of NBR, POLYURETHANE and Viton® (for high temperatures)
  • special configurations on request
  • fixing accessories, guide unit and mechanical piston rod lock.
Series ISO 6432

TECHNICAL DATA Polyurethane NBR Viton®
Operating pressure max 10 bar (max 1 MPa)
Temperature range –10°C÷+80°C –10°C÷+80°C –10°C÷+150°C (non-magnetic cylinders)
Fluid Unlubricated air. Lubrication, if used, must be continuous
Bores Ø8; Ø10; Ø12; Ø16; Ø20, Ø25;
Design Threaded heads
Standard strokes Single-acting: for bores Ø8÷25 strokes from 0 to 50 mm
  Double-acting:
for bores Ø8÷10 strokes from 0 to 100 mm
for bores Ø12÷16 strokes from 0 to 200 mm
for bores Ø20÷25 strokes from 0 to 500 mm
  Double-acting, cushioned:
for bores Ø16 strokes from 0 to 300 mm
for bores Ø20÷25 strokes from 0 to 500
Versions Double-acting, Double-acting cushioned, Single-acting retracted piston rod, Through-rod, Through-rod cushioned, Version with piston rod block.
Magnet for sensors All versions come complete with magnet. Supplied without magnet on request.
Inrush pressure Ø8 to Ø12: 0.8 bar - Ø16 to Ø25: 0.6 bar
Forces generated at 6 bar thrust/retraction Ø 8: 28N / 22N Ø 10: 44N / 37N Ø 12: 64N / 50N
Ø 16: 108N / 95N Ø 20: 169N/148N Ø 25: 265N / 228N

COMPONENTS
  1. PISTON ROD: C40 steel or stainless steel, thick chromed
  2. HEAD: anodised aluminium alloy
  3. PISTON ROD GASKET: SFR (PARKER PRADIFA) self-lubricating, NBR or Viton®
  4. GUIDE BUSHING: steel strip with bronze and PTFE insert
  5. JACKET: drawn anodised aluminium alloy
  6. HALF-PISTON: acetal resin
  7. PISTON ROD GASKET: polyurethane (PARKER PRADIFA), NBR or Viton®
  8. MAGNET: neodymium
  9. Static O-rings: NBR or Viton®
  10. CUSHIONING GASKET: NBR or Viton®
  11. NEEDLE: OT 58 with needle out movement safety system even when fully open
  12. BUSHING (optional): self-lubricating bronze
Components

KEY TO CODES
CIL 1 1 2   0 16 0 0 2 0 C   P
  TYPE     DIAMETER STROKE     P polyurethane
  101 SE axial coupling O Standard 8 Ø 8÷10 stroke 0-100 mm C C40 N NBR
  102 DE axial coupling U Bronze rear 10 Ø 12÷16 stroke 0-200 mm chrome- V Viton®
  104 SE through-rod   head bushing 12 Ø 20÷25 stroke 0-500 mm plated    
  106 SE cushioned   Without 16         piston rod    
  109 DEA   head mut 20         X stainless    
  110 DE V Non- 25         steel piston rod    
  111 SE   magnetic                  
  112 DEM S                    
  113 DEMA                      
  114 DEM through-rod                      
  115 DEMA through-rod                      
  116 DEM                      
    for mechanical lock                      
  117 DEMA                      
    for mechanical lock                      
DE: Double-acting (non-cushioned, not magnetic)
DEM: Magnetic double-acting (non-cushioned)
DEMA: Magnetic double-acting (cushioned)
DEA: Cushioned double-acting (non-magnetic)
SE: Single-acting (magnetic)
N.B.: For cylinders Ø 8 to 10, standard stainless steel piston rod.